New Tools! And Why The Tools At Lowe's Are Wack!

This year I have decided to go through my tools at work, reorganize, clean out, and try to make my tool bag and "tool kits" more professional. Maybe professional is not the correct term but just easier for ME to use and a little more presentable. I also made the decision to have another tool bag. I wanted to make a small tool bag for what I consider small or light jobs that I do upstairs that I am tired of carrying my big heavy tool bag to. A smaller bag, with a common (slotted) screw driver, small pair of hogs, phillips screw driver, my leatherman, a pair of dikes (diagonal cutters) and a small set of allen keys. I had a bag that I used for a while a few years ago and decided against. I also had a small pair of hogs, the leatherman, and allen keys. I unretired a pair of dikes from home and went to Lowes' to buy the rest.

I had a gift card form Lowes' that I got for Christmas so I figured I would get the stuff I wanted from there. Sounds easy but I spent two hours in Lowes' looking for something worthwhile to purchase. All I wanted was a slotted screwdriver, phillips, or even better a flip flop that could do both. My troubles started when I figured out that ALL of Lowes' tools are cheap plastic things that look like they would not last a year out on the line. ALL the flip flop screwdrivers were garbage units that tried to do too many things and as a result everything they did was wack. When I look for a flip flop I either want one that is simply one handle with one shank that has a slotted head on one side and a phillips head on the other. ALL the ones at Lowes' where gimmicky with special apex heads that could be flipped around but that if you lost them-the tool becomes useless. The one half decent one they had had an awful plastic handle with a cap on top to hold the apex heads. The cap was cheap plastic also and you could tell it was going to fall apart.

I ended up buying a slotted #3 Husky screwdriver with an acrylic handle sort of like the old school Craftsman screwdrivers. Since I could not get a flip flop I tried to find a apex holder, or a screwdriver that could hold a standard apex bit. Lowes' does not carry one of those. What I did find was a little apex holder that came in a kit that included a small pair of hogs, the apex holder with bits, a small tape measure and a knife. The apex holder was small (about three inches) with a magnetic apex holder and the rest of the stuff I just kept at home. The little kit was about $10.00 so I thought it was worth the risk.

Since I started using my small tool bag the little apex holder has helped me out a few times and I think I like the idea of the smaller tool bag. I also added a small waterproof pouch on the side for my apex bits.

In addition to my tool bag, I got my golf cart cleaned out, and organized. I was able to make enough room in my cart for my own environmental splice kit that I just made. The kit includes splices, barrels, wax cord, zip ties, a small wire stripper, lighter, shrink wrap, and a small portable butane torch. I always hate having to go back to the shop to get the environmental splices when I'm out on Tango so I now have my own small kit.

This may seem like overkill to a lot of people but the world of a Line Mechanic is a fast paced one. I still believe in trying to do my job as quickly and efficiently as I can. I hope these new tools will help.

It's Hard To Let Go

I work with tools for a living. Tools have allowed me to own a few homes, buy nice cars, go on vacations, put clothes on my families back, and feed them as well. Tools have been a major part of my life since high school and like most mechanics I have come to love tools, all tools. I can spend a lot of time in the tool section of any store. I like ALL tools, I even collect old and antique tools so when a tool breaks and is no longer useful to me it is understandable that I have trouble throwing it away. Like a lot of mechanics, I think, I end up with a lot of broken tools in my tool box at home.

The other day while working at home I needed a pair of Channel locks or slip joint pliers. I went and pulled the largest ones I have out of my box and went to work. Well these pliers came to me a few years ago from a person who was working on my back yard. This guy disappeared and later I found out he got arrested! When he got out he called and said he was going to finish the job and come by to get his tools. Long story short: two years later I sold all his stuff but kept some of the things I thought were worth it.

When I tried to use these pliers they would slip, every time I went to apply pressure to the stupid thing the joint would slip and the pliers would not be tight anymore. I tried tightening them with the same result and by now I was pissed off so I chucked them in the trash.

Sounds like an easy choice but those pliers sat in the trash for two days and every time I went into that room I saw them. Being a tool lover I kept thinking "maybe I could fix them" or "maybe I can use it for something", "hey I could always use the handles as levers". I stayed strong and they ended up going away. But this brings to light how hard it is for a mechanic to throw away a tool.

When a tool that I use at work breaks I "retire" it. When I retire a tool I bring it home and put it in my big tool box. These tools have been to battle and war with me, they have been on the cold ground with me, they have fixed millions of dollars worth of equipment in their lifespan. When they get too old or busted up I bring them home. The nature of my job requires that the tools I use work when I need them so when they get too old they have to be replaced. When I worked in the hangar I was able to keep my older tools at work and in that setting it is often handy to have some wrenches that you no longer use around which you can cut up or weld on to make special tools.

For me are my life. I will always have a hard time getting rid of them and truth be told, if you take care of them they do not need to be replaced often. I have a hard time letting go of them, some of them have been with me since Aviation High School and are really a part of me. They say that you always remember your first love, well you always remember your first flip-flop screw driver, or good pair of safety wire pliers. I may be a "tool nerd" or "airplane junky" but that's ok, I keep planes in the air, sounds simple but requires a lot of tools and some knowledge. Tools are to mechanics like a computer program is to a tech guy, we use them to figure out (in our case) what is wrong with a plane. Simple concept and when done right it's like a little miracle.

My New Mag-Lite LED XL100 Dayshift and Swing Shift Friendly

A long time ago I did a post on my trusty 3D cell LED Mag-Lite. Anyone who remembers that post can recall how much I endorse the Mag-Lite line of tools. Tough as nails, reliable and of course able to be used as a whacker (hammer). I still use my 3D Mag-Lite almost every day I'm at work and certainly every time I work midnight shift. The light works great but recently I have been looking for something smaller to carry when I'm on day shift or swings and certainly when I'm on a road trip. Ideally something that I could place in my pocket but still throw out some good light.

I started looking at all those little LED lights that you can find at the gas station or Wal-mart etc. As a matter of fact my buddy, Maybe-Maybe< carries one of those little lights and it works fine for him. I could not bring myself to using one of those cheapies at work. I own one that I keep in my car and another as a back-up light, but as a primary light I just can't do it. Maybe-Maybe has told me that he is at a point in his career in that he does not wish to buy any new tools. He claims to be about five years from retirement (yeah right). I am no spring chicken but I also have about another twenty years before retirement so I still want to buy some quality tools.

I like most Aircraft Mechanics am broke!!! So when I got a Home Depot gift card a while back I knew I would waste it all on tools and such. Today while picking up a hose for my refrigerator (it was on MEL), I looked around and saw the Mag-Lite LED XL100. Small, compact, water and drop resistant (hey it is a Mag-Lite!) and its an LED.

The XL100 is 4 3/4" long with a diameter of a quarter. Once I got it unpacked and loaded with the batteries (they came with the thing) I tried it out. To say it is bright is an understatement. The XL100 puts out a nice focused beam which is fully adjustable like any larger Mag-Lite. The light is turned on by a thumb switch on the butt end, sealed of course.

One of the kind of gimmicky things that I don't really approve of is the way the light swithces between "modes". Yes Mag-Lite has jumped on the different modes band wagon, which is kind of sad but I know they have to appeal to more folks than just Old School Aircraft Mechanics. There are 5 modes: DIM (normal), STROBE, NITELIGHT, SIGNAL, and SOS. That would be ok but to switch between the modes you don't turn the little knob/button/switchy/red thing in the photo above like I thought. That thing may look like it is movable but it is not. I had to break open the included written directions to figure this thing out. Basically it is a motion sensitive switch, you hold the light so that the mode you want is at the twelve o'clock position, press the on/off switch and hold it down, in the DIM mode you can adjust the brightness by then twisting your wrist in a counter clock wise or clock wise direction. Ridiculous!!

I'm pretty sure I will never use any mode besides the normal one (DIM??).  Anyway the thing is pretty bright and for that it is doing it's job. I hope to never have to test it's drop test toughability but I'm sure it will happen sooner or later.

I will let you guys know how well it holds up. I hope to never have to read an instruction manual to figure out how to use what is supposed to be a simple tool but I fear the days of simple tools are over. Ahh another post subject....

Happy fixing!!

To Drill Or Not To Drill

I like my drill I use at work. I have a Hitachi cordless drill and it has worked for me very well. I am an advocate for using cordless drills, they speed up panel removal, etc. I do, however, get into these moods where I do not want to use my drill to remove panels. Occasionally I like to remove screws by hand, it helps me keep touch with the tactile, hands on nature of our profession. I also notice that there are guys at my job who use the drill to remove and install all sorts of screws into all sorts of things. I have seen guys use a drill to remove and install the little screws that safety the nose wheel retainer ring on. Then they wonder why the thing gets stripped out! I have seen a guy use a drill to put 1/4 turn fasteners in! I mean they only require a 1/4 turn of the wrist for goodness sake!

I think the cordless drill is a blessing to our jobs but people should also be able to use a speed handle or ever a screw driver and I'm convinced that some guys do not know how! We all know that even if you have a panel that has 100 fasteners it is easier, and I think smarter, to loosen each one with a speed handle before trying a drill. We all know this and yet time and time again I see guys blasting away with their drill, cussing when they strip out a screw head, and loathing having to go back and try easy outing the screw.

I know that I am an old fashioned type of guy and that there are cool new easy-outs now that almost always work, but I still reach for the old speed handle. Of course I am also finishing up before most because I do not have to drill out screws because of stripped heads.

This thought was not really about speed handles but rather simply using hand tools now and then. Once a long time ago I was changing a forward position light on a 737-300. I had my speed handle going and my ratcheting screwdriver and I was happy as a clam. One of the other RON mechanics was driving by and asked if I wanted to use his drill motor. I told him no thanks and explained that I wanted to do it by hand. He drove off with a confused look on his face and returned later with a drill motor that he left on my belt loader (that should tell you how long ago it was). Apparently by the time he reached the shop he had convinced himself that I was kidding around!

Call me a glutton for punishment but there are times when using a screwdriver makes me feel like I have accomplished something.