To Cargo Door Or To Not Cargo Door

This past weekend an old -300 came in and I had the pleasure of Terminating the plane. While doing the walk around I noticed that the rampers were having trouble opening the aft cargo door. This is not unusual and in fact happens a lot. Usually there is a bag or box that has fallen on the door or the door was closed with the cable or cable handle struck in the door jamb. This was what I suspected was the trouble but once the ramp supervisor and I got the door open it was clear that the threshold plate was damaged.

The plate was cracked and peeled up in such a way that it formed a pointy triangle that stuck up about and inch to an inch and a half. The rampers still had to get the bags off and I had to move the plane from the gate to Tango remote area. I got a hammer and beat the section back down so I could close the door for the remote and the rampers could off load the bags. The threshold is stainless steel and once I got it bent back, the piece broke off. I was able to remote the plane and wrote up the threshold plate on the board in the shop so that the mechanic who worked the plane that night could inspect it.

The next morning I found out that the threshold needed to be replaced (big surprise) AND the cargo door needed to be replaced as well. I admit that I did not look at the door when i was terminating as I should have done once I saw the condition of the threshold. I was surprised even more when I was told that the cargo door was being flown in on a ferry flight for US to change out! I know that we are mechanics and the this is a job that we SHOULD be able to accomplish in OAK. The reason I was surprised about it is that we have very little tooling in OAK and even less hardware etc.

Old Threshold with piece missing that I broke off.

Those of us who have worked hangar work or non-sched type maint. know that work like this is not as straight forward as it sounds. There is always something that will go wrong or some part that will be needed which is not originally thought of. In other words the can of worms will be opened!!

The plane should have been ferried out to PHX as was originally planned but as we know MX control knows better than us when it comes to such things. Instead of ferrying the plane to PHX the door was ferried to us and of course the plane sat here for three days because:

We have no parts.
We have no tooling.
The new threshold plate came without any holes and was then mis-drilled.
PHX mechanics had to come and RESCUE us.
The new door had to be fitted into the old opening.

On day two I went out to the plane to get some grip lengths for our manager, this was before the PHX rescue mission, I decided to check and see how far off the new mis-drilled threshold was. when I put it on I saw that only two of the holes were off, and those holes were not off by much. One hole was almost off by half a hole the other by about a quarter of a hole. I hate to say this but I think that I could have made it work. The persons assigned to the job were not real happy about doing it and so I think they found a convenient stopping point once they saw that the holes were a little off.

This is a recurring theme at OAK. We have people who are not interested in going the extra mile of trying to solve problems in order to get planes fixed. As I keep saying we in OAK cried, and cried about doing OPC mods (moving the On Board Computers in the -300 AC) until they stopped assigning them to us and MX Control thinks we will be able to hang a new cargo door? Any non-sched mechanic would have drilled out those holes and put larger fasteners or washers or something on it to make it work. Like I said this was an old plane and it has no winglets, and only one FMC so I believe SWA is going to be getting rid of it soon. A couple of button head fasteners instead of flush ones would not hurt this plane in any way shape or form.

The PHX guys came in and actually did the real maintenance work that the OAK guys didn't want to do. When they were half way through they came back to the shop and what really amazed them was that no one came out to watch them and maybe learn how to do the job for the next time. That says a lot about the level of work ethic in OAK and about what we once had that seems to be missing now-pride of workmanship.

Guys are more interested in resting than working and god forbid you ask them to try and learn something new. This is one of the things that is chasing me out of this station. Sure it's expensive to live here and I have personal reasons for leaving but this laziness is one of the things that makes it all little easier to make the move. I'm not sure if any of that exists in DAL but I am sure that it has been lost in OAK and that's a real sad thing for me to think about. I have learned a lot from a lot of people while working in OAK but now there are way more people who need to learn way more but don't want to. They have us out numbered.

To Drill Or Not To Drill

I like my drill I use at work. I have a Hitachi cordless drill and it has worked for me very well. I am an advocate for using cordless drills, they speed up panel removal, etc. I do, however, get into these moods where I do not want to use my drill to remove panels. Occasionally I like to remove screws by hand, it helps me keep touch with the tactile, hands on nature of our profession. I also notice that there are guys at my job who use the drill to remove and install all sorts of screws into all sorts of things. I have seen guys use a drill to remove and install the little screws that safety the nose wheel retainer ring on. Then they wonder why the thing gets stripped out! I have seen a guy use a drill to put 1/4 turn fasteners in! I mean they only require a 1/4 turn of the wrist for goodness sake!

I think the cordless drill is a blessing to our jobs but people should also be able to use a speed handle or ever a screw driver and I'm convinced that some guys do not know how! We all know that even if you have a panel that has 100 fasteners it is easier, and I think smarter, to loosen each one with a speed handle before trying a drill. We all know this and yet time and time again I see guys blasting away with their drill, cussing when they strip out a screw head, and loathing having to go back and try easy outing the screw.

I know that I am an old fashioned type of guy and that there are cool new easy-outs now that almost always work, but I still reach for the old speed handle. Of course I am also finishing up before most because I do not have to drill out screws because of stripped heads.

This thought was not really about speed handles but rather simply using hand tools now and then. Once a long time ago I was changing a forward position light on a 737-300. I had my speed handle going and my ratcheting screwdriver and I was happy as a clam. One of the other RON mechanics was driving by and asked if I wanted to use his drill motor. I told him no thanks and explained that I wanted to do it by hand. He drove off with a confused look on his face and returned later with a drill motor that he left on my belt loader (that should tell you how long ago it was). Apparently by the time he reached the shop he had convinced himself that I was kidding around!

Call me a glutton for punishment but there are times when using a screwdriver makes me feel like I have accomplished something.