And In The End....

The very last day of my work week and I was looking forward to winding down the week on a nice easy note. When we came in on days they told us that a slat was damaged the night before and a new one was on the way. I have to admit I was not looking forward to working it and I decided not to volunteer my services when it came in. We did our normal thing that day and the new slat came in around 11am. The Lead Mechanic, I'll call him 20 Year Grudge, came in and asked who wanted to volunteer. No body moved or said a thing. He left and came back shortly and told one of the guys (lets call him F1) that he was going to help another guy, Banyan, on the slat.

I breathed a sigh of relief! I sat there for about 10 minutes then decided to go and help also. Crazy but true.

Banyan, F1 and 20 Year Grudge were just getting started and I jumped in where I could. Panels had to come off, the actuator had to be disconnected, the anti-ice duct also. Wires checked and moved and the puzzle of what the best way to remove the thing was slowly worked out. The Foreman (lets call him Surf) delivered our new slat and it was prepped.

As I was not assigned the job, when a gate call came over the radio I went to work it along with another guy so that these fellas could keep going. Around shift change 2:30pm the next player arrived-Tuna. Tuna was to be our inspector for the job. When we have large jobs or any time we mess with the flight controls we assign an inspector to look over the work and keep us all honest. Surf came over the radio "Banyan, you wanna stay for swing shift to finish the job?" Banyan was tired, he told me he could not wait to be done today so he could go home. I could tell he did not like the idea of staying but I knew that, like a lot of us, the idea of leaving a job half done was worse to him. He told the swing shift Lead (let's call him SkiBoat) that he would stay if they let Goat stay. he also said that if we stayed we could get the thing done in four hours. SkiBoat got on the radio and said "Hey Surf, Banyan will stay if we let Goat stay, he, Goat and F1 think they can finish in four hours." To my surprise Surf came back and said it was OK!

We got that old slat off and put the new one on. We actually put the new one on three times because we kept forgetting to hook up a wire or bracket or something. We finally got it up and Tuna inspected everything before we did our ops check. Tuna gave the OK to close the panels and we grabbed our screw guns and went to town.

We finished around 4:15 so all in all we spent about 5 hours on the thing. It felt good to work with guys that knew how to get a job done. No whining, no complaints just honest work. These guys don't stop for food or stupid things like that. They work hard and they work hard until the job is done. I am glad and proud to be in this group of workers and I hope that they feel they can rely on me the way I know I can rely on them.

One strange thing that happened: Once we were done and cleaned up F1 comes in and tells us that the plane we were working on is due to be retired in a month and a half! All that work and the plane is most likely going to the desert to be chopped up! We had shed sweat and even some blood to keep this thing flying and in the end...she was an old tired lady.

I have said it before and I will say it again, it's a strange feeling to know the plane you work so hard on is going to be leaving soon. All of us, for years worked hard to keep that plane going, "just get her over the fence" as we say. She no longer makes economical sense to keep around. Most likely she is timed out, too many cycles, not worth keeping with all the new more economical planes coming out. Like the 737-200s that this 737-300 replaced they will slowly fade away until they are stuff of legend, just a story to tell a probbie: "We used to change those heavy slats out here in the sun and rain and in the end...she was parked in the desert and dismantled."

Photo:Bobby Allison via airliners.net

The Work Of Team Work

Last Saturday at work was one for those days that you never forget. From the moment we clocked in we were busy. There were planes to move and a grounded plane that needed the turbo-fan boot replaced. The lead got all the remoters assigned and I volunteered to change the turbo-fan boot. I've R&R'd turbo-fans before so I remember monkeying around with the boot. The part came in from Phoenix around 630 am so I picked it up and hopped into my golf cart for a nice morning drive out to Tango. On the way out there I noticed that one of the other day shift mechanics was following me out. I figured he was just driving to his remote plane so I thought nothing of it.

Once I got to the plane the other mechanic, I'll call him Banyan, drove up. I asked him if he was supposed to remote the plane I was working on but he said that he was just checking out the turbo-fan boot thing. The turbo-fan boot is a flexible duct that gets installed between the turbo-fan and the exhaust duct towards the aft of the airconditioning bay. The boot is held in by two large clamps, one on each side. sounds easy enough. As I started to install the new boot I put the clamp on the aft exhaust duct and then tried to put the forward clamp on. The problem was that I needed to pull the boot forward while positioning the clamp and at the same time tightening the clamp. Long story short Banyan was there and was able to pull the duct forward while I positioned and tightened the clamp.

The next thing was a gate call for an engine bleed trip. The Lead Mechanic, lets call him-Shooter, rode out there with me. We got permission from MX Control to lock out the bleed air system on the #2 engine. I grabbed the core-cowl pump before we left and we had that thing open, the PRSOV locked out, and the engine closed in about 7-8 minutes. The paper work took longer than the actual work.

That Saturday we had a plane with a DEU problem that required mechanic in the office to look up fault codes, a FO seat that had issues, and all the normal Saturday day shift calls (oils, hydraulics, radio issues, window washes, coffee makers, passenger seat problems). The day was simply humming with work.

The last example I will share from that day was a hydraulic leak. The FO did his walk around and found a hydro leak in the right wheel well. Four of us went to check it out, myself, Shooter, Banyan, and another mechanic-El Gato. The wheel well was a fog of hydro fluid. El Gato was trying to find the leak but the fluid getting into his eyes and lungs kept driving him out of the wheel well. The stores clerk brought out eye protection and a mask for him while he and Banyan continued to search out the pin hole leak. Any time there is hyd. fog like that the leak is a pin hole or very small crack in a component or line. Shooter went upstairs to switch the pump on and off and I was relaying when to do that on the radio. Once they found the leak El Gato started to take the line apart and Banyan went to get the temp-line kit. I went to get some gray tubs for the dripping fluid to go into instead of just letting it go all over the ground.

El Gato and Banyan had the line out and the new temp-line in while Shooter did the paperwork and I cleaned up and just helped out by handing tools to them etc. We took maybe an hour total hit on the plane but it was done and done right.

All of the above happened before noon. In the 5 \1/2 hours from 6:30 to 12 we worked all those issues and worked together often with out the need to ask for help or even the need to verbally communicate between us. The teamwork that was displayed was amazing. One mechanic knew what to do and others knew if he needed help doing it. If he went upstairs I stayed down stairs to do what needed to be done. If he is going to remove, whatever, he's going to need this tool or that tool so I better grab it.

The foremen recently asked all of us how to improve the teamwork here at OAK. I'm starting to believe that teamwork comes naturally to some. The thing about last Saturday and the guys working is that they have worked together for a while now, some even before starting at SWA. These guys know how to work and how to work together. Banyan knew that he did not have to ride out to Tango in the morning to "check out the turbo-fan boot". He also knew that, while the job could be done by one guy, the job would be done quicker if that one guy had a hand at the crucial last clamp!

Are these things that can be taught? Remember that in order to learn one has to be willing to be taught! The work of teamwork is that teamwork works, but only if you have the right team.