Thursday, July 10, 2014

Cooperation

There I was......that's how a lot of maintenance stories begin. "There I was, hydraulic fluid all over me, there I was, laying in a 2" deep puddle of rain, there I was, saving the day as usual."

The majority of days in our business are not that exciting. We muddle through the day putting oil in engines, fixing reading lights, adjusting the PA volume, checking tire pressure, any of hundreds of little things that comprise the industry.



One of the things that I'm sure the public does not realize is the amount of cooperation there is between airlines (at least in the maintenance departments). This is a brotherhood really and one that would grind the airlines to a halt if it did not exist.

Here is how it usually goes: Plane comes in and sure enough we need a new part. As usual the part you need is the one that you do not stock. Maintenance control will call around to maintenance departments around our area to see if they have the part. If they do and they are willing we can "borrow" the part from them. The borrowed part is used on a per hour or per cycle basis and is inspected and tested once returned.

That takes care of the big parts but what is really cool is how most airlines cooperate with the small parts. The innumerable bolts, nuts, washers, glue, sealant, grease, oil, tape, etc. Most often when a guy shows up at the shop from XYZ Airline and says he needs a bolt of such and such size with the correct washer we will simply let them have it. This may sound like a small thing to write about but I'll give an example of a couple of times where it saved me.

I was up in Seattle with a guy I'll call Mountain Man. We were there looking for short in a wire. The trouble was that this wire ran through the connection between the wing and the fuselage. After we got it all straightened out we realized that we needed a particular type of clamp for high temp areas. We called maintenance control and they suggested we head over to Alaska Airlines to see if they had one. A truck ride later and a quick visit to the Alaska Airline Maintenance hangar and the guy in the engine shop tossed one to us. We were able to install and get the plane ready for the next day. I should mention that it was around 2 or 3 am when this all went down. If we did not get the hook up from Alaska we would have had to wait until a clamp was flown up to us from Oakland sometime around 10 am the next morning.

Adel Clamp


The next example happened just the other day. We had a plane grounded that needed a CIT sensor replaced on the #1 engine. I was kind of excited because I could not recall ever changing one of those even though they do go bad every now and then requiring R&R. As it turned out when whoever took the old sensor out one of the threaded inserts in the engine case came out along with it's mounting bolt. I've never had one of those inserts fail like that and I'm pretty sure the guys I was with had never seen it either. Since that is a very unusual thing to replace we at SWA did not stock it in Oakland. The guys thought we were stuck until the foreman headed across the ramp to Alaska Airlines Maintenance and sure enough they were able to provide us with one so we could get that plane back in service.

Stupid little threaded inserts.


This cooperation occurs mainly on graveyard shift when a guy or gal from another airline's maintenance department will stop by to borrow a torque wrench, or hardware or whatever. While working graves I have had to drive to SFO and borrow parts from United Airlines plenty of times.

It's pretty cool that mechanics are like this (for the most part) any where you go. An airline mechanic will be more interested in getting that plane back in the air than worry about you being from the competition. There is no ego tripping or even thoughts of denying help. A write up is a write up, a plane is a plane, parts are parts.

This industry is surprisingly very small. We run into people we have worked with at other companies time and time again. What if you refuse to help a mechanic one night and years later he or she is doing the hiring at the next place you try to work?

19 comments:

  1. I open up your blog after almost giving up on ant more posts, and there are three new stories for me to view. Welcome back, it is good to see you writing again.
    Cricket

    ReplyDelete
    Replies
    1. Cricket good to hear from you! Yeah I figure I will write a blog every now and then.

      Delete
  2. I am considering entering this field. How is the job market? I have always loved fixing things and loved airplanes, but don't know if their are jobs for entry-level a & p mechanics. Any ideas?

    ReplyDelete
  3. I am striving to achieve my private pilot's license. Currently I am studying about airplane maintenance. I've got a course test in a few weeks and would love to gather as many resources as I can. Is there a particular brand of airplane maintenance book I could buy?

    http://www.specializedaero.net/services.html

    ReplyDelete
  4. There was a time when I was going abroad and the plane I was on needed maintenance work. We had to wait until the next morning to fly our plane. I am glad that they figured out what was wrong with the plane before we left for air. I am grateful that we landed safely. http://www.specializedaero.net/

    ReplyDelete
  5. Hello!My name is Nathalie Sarju and I'm student at the University of Central Florida. I'm reaching out to you, not for myself but for a better cause. Please, if you could take one minute of your time and check out this gofundme for a student that may be in a situation similar to one you know of, I'd appreciate it more than you can imagine.

    gofundme.com/airplanetoairforce


    If you have any further questions or inquiries about this gofundme, please feel free to email me!

    Have a blessed day,
    Nathalie Sarju

    ReplyDelete
  6. I have read so many articles on the topic of the blogger lovers however this post is actually a fastidious article, keep it up.Aircraft Maintenance

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. There are some new online applications to help A&Ps improve their analysis of failure patterns. We are using Quantum MX: http://www.quantum-mx.com by FLY Online Tools with great success.

    Thanks for writing about this topic.

    ReplyDelete
  9. This comment has been removed by the author.

    ReplyDelete
  10. This comment has been removed by the author.

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. thanks for article. please visit my website.airplane parts

    ReplyDelete
  13. thanks for article. please visit my website.aircraft parts

    ReplyDelete
  14. Thank you for sharing such a nice blog. It's really impressive. I appreciate your intelligence and knowledge. This blog is really beneficial for many of us. Here is something related to Aircraft Maintenance Platforms.

    ReplyDelete
  15. Hey thanks for sharing such informative blog here, it will help to all readers. Aviation College in Udaipur

    ReplyDelete
  16. The fuselage or body of the airplane parts, holds every one of the pieces together. The pilots sit in the cockpit at the front of the fuselage. Travelers
    visit
    https://superiorairparts.com.au/

    ReplyDelete
  17. Hi! Thank you for reading my blog. I'm glad that it's helping people like yourself with your questions about selling planes, and look forward to providing more helpful information on this topic in future posts

    ReplyDelete